Flicker Flame LED Bulbs
Candle-like movement or a steady warm glow. Clear, frosted and satin spun finishes with E12, E14, E26 and E27 bases.
Create a gentle candle effect without a real flame. HongYu Bulb's flicker flame series combines a nominal 1800K light colour with approximately 20 lm output for decorative ambience. Choose the glass finish, bulb shape and base that suit your luminaire, then review a sample in the intended fixture.
See the Flame Effect
Real product videos show the appearance of the three finishes. Camera exposure and your display can change the perceived colour and brightness.
Two Modes, One Decorative Bulb
Moving flame effect
The light varies deliberately to suggest a candle flame moving in a breeze. Use it where the visual effect matters more than general room illumination.
Steady warm light
Choose a constant light appearance through the two-step switch function. Confirm the switching sequence and power-cycle behaviour with your sample before specifying a multi-lamp installation.
Product Gallery
28 models
C22-E14-1W-FL-C
ClearE14 · 1W · 22 × 91 mm
C22-E14-1W-FL-F
FrostedE14 · 1W · 22 × 91 mm
C35-E14-1W-FL-C
ClearE14 · 1W · 35 × 98 mm
C35-E14-1W-FL-F
FrostedE14 · 1W · 35 × 98 mm
C35-E14-1W-FL-SP
Satin SpunE14 · 1W · 35 × 98 mm
C35L-E14-1W-FL-C
ClearE14 · 1W · 35 × 105 mm
C35L-E14-1W-FL-F
FrostedE14 · 1W · 35 × 105 mm
C35L-E14-1W-FL-SP
Satin SpunE14 · 1W · 35 × 105 mm
C35-E27-1W-FL-C
ClearE27 · 1W · 35 × 90 mm
C35-E27-1W-FL-SP
Satin SpunE27 · 1W · 35 × 97 mm
C35L-E27-1W-FL-F
FrostedE27 · 1W · 35 × 97 mm
C7-E12-1W-FL-C
ClearE12 · 1W · 22 × 91 mm
C7-E12-1W-FL-F
FrostedE12 · 1W · 22 × 91 mm
B11-E12-1W-FL-C
ClearE12 · 1W · 35 × 98 mm
B11-E12-1W-FL-F
FrostedE12 · 1W · 35 × 98 mm
B11-E12-1W-FL-SP
Satin SpunE12 · 1W · 35 × 98 mm
C11-E12-1W-FL-C
ClearE12 · 1W · 35 × 105 mm
C11-E12-1W-FL-F
FrostedE12 · 1W · 35 × 105 mm
C11-E12-1W-FL-SP
Satin SpunE12 · 1W · 35 × 105 mm
B11-E26-1W-FL-C
ClearE26 · 1W · 35 × 90 mm
B11-E26-1W-FL-F
FrostedE26 · 1W · 35 × 90 mm
B11-E26-1W-FL-SP
Satin SpunE26 · 1W · 35 × 97 mm
C11-E26-1W-FL-C
ClearE26 · 1W · 35 × 97 mm
C11-E26-1W-FL-F
FrostedE26 · 1W · 35 × 97 mm
H19-E26-1W-FL-SP
Satin SpunE26 · 1W · 58 × 145 mm
Series Specifications
| Rated power | 1W |
|---|---|
| Input voltage | 85-265V AC |
| Nominal colour temperature | 1800K |
| Nominal light output | Approximately 20 lm |
| Colour rendering | Ra 80 |
| Operating modes | Two-step switching: flame effect and steady light |
| Bases | E12, E14, E26 and E27, according to model |
| Glass finishes | Clear, frosted and satin spun, according to model |
| MOQ | From 100 pcs; confirm the model mix and packaging requirements |
| Lead time | 15-45 days, subject to order details and production confirmation |
| Branding and packaging | OEM branding and private-label packaging available |
Two-step switching is a mode-selection function, not a claim of compatibility with external phase-cut dimmers. A wide input-voltage range does not by itself establish certification for every destination market. Confirm the model, fixture and market requirements before ordering.
Photometric Test Reports
Model-specific sample measurements are shown below. These measured values are separate from the series nominal specifications of 1W, 1800K, approximately 20 lm and Ra 80. Results apply to the tested samples under the recorded conditions, not to every model or production unit. These are photometric test reports, not product safety certificates; they do not verify switching behaviour or external dimmer compatibility.
C35L-E27-1W-FL-C
Measured sample: 0.94 W · 19.27 lm
1730 K · Ra 81.0
Test voltage: 230 V
Test date: 17 September 2026
Download PDF (250 KB)
C35-E27-1W-FL-F
Measured sample: 1.06 W · 20.50 lm
1848 K · Ra 83.9
Test voltage: 230 V
Test date: 17 September 2026
Download PDF (251 KB)
BT58-E27-1W-FL-SP
Measured sample: 0.85 W · 21.51 lm
1818 K · Ra 83.1
Test voltage: 230 V
Test date: 17 September 2026
Download PDF (272 KB)
Choose the Finish for Your Fixture
Clear or frosted
Clear glass leaves the light source visible. Frosted glass softens its outline. Compare both in an exposed candle holder, decorative wall light or other intended fitting.
Satin spun
The textured satin spun finish gives the glass a different appearance whether the lamp is on or off. Review the actual sample and the supplied effect video for your preferred look.
Ordering Questions
Can I use a dimmer to select the two modes?
The listed control is two-step switching. Do not assume that an external dimmer will select modes or dim this series correctly. Send your switch or controller details for confirmation.
Is this a replacement for general room lighting?
The nominal output is approximately 20 lm. This series is intended for decorative ambience, not as the main source of room or task illumination.
Can I order my own brand and packaging?
Yes. Share the selected models, quantity, destination market and packaging artwork. HongYu Bulb will confirm the quotation, minimum order conditions and delivery schedule.
Which base and size should I choose?
Match the lamp holder and available clearance in your fixture. The gallery lists the base and dimensions for each model. E12, E14, E26 and E27 are distinct options; check the exact holder before ordering.
Build Your Flicker Flame Collection
Send the model numbers, quantity and destination market. Include your preferred finish and any private-label packaging requirements.
For a different lighting effect, explore EU dim-to-warm bulbs or low-voltage LED filament bulbs.